44 EN - Operator’s manual
3
1
2
3
3
4
4
5
6
7
8
4.2 Control unit (Fig. 4)
The hydraulic unit comprises the following:
1. load bearing chassis;
2. cover panels;
3. control console;
4. main switch: if the hydraulic unit is connected to the mains, activating the main switch
(position 1) lifts the upper platforms and the load positioned on it;
5. down button: pressing the button lowers the upper platforms and the load positioned
on them;
6. nal travel button (recessed version): pressing the button together with the down but-
ton lowers the upper platforms and the load positioned on them towards the ground.
To Next Page
Loading...