TECO RG57A3/BGEF User Manual

7
Operations
COOL / HEAT / FAN Operation
1. Press the MODE button to select COOL,
HEAT or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17
O
C~ 30
O
C in 1
O
C
increments.
3. Press the FAN button to select the fan
speed in four steps- Auto, Low, Med,or
High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the temperature setting is
not displayed, neither adjustable.
AUTO Operation
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17°C~ 30°C in 1°C
increments.
3. Press the ON/OFF button to start the air
conditioner.
1. In the Auto mode, the air conditioner will
automatically switch between Cooling, Fan,
and Heating mode by sensing the difference
between the actual ambient room
temperature and the setting temperature on
the remote controller.
2. In the Auto mode, the fan speed is
automatically controlled.
MODE
FAN
TEMP
SLEEP FRESH
LED FOL LO W ME
TURBO SEL F CLEAN
ON/OFF
TIMER
ON
TIMER
OFF
3
1
2
DRY Operation
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired
temperature. The temperature
can be set within a range of 17
O
C~ 30
O
C
in 1
O
C increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dry
mode, you can not select the fan
speed. It is automatically controlled by the
system.
MODE
FAN
TEMP
SLEEP FRESH
LED FOL LO W ME
TURBO SEL F CLEAN
ON/OFF
TIMER
ON
TIMER
OFF
3
1
2
7
8
NOTE

TECO RG57A3/BGEF Specifications

General

Brand	TECO
Model	RG57A3/BGEF
Category	Remote Control
Language	English