BEFORE STARTING
www.tecoonline.com | www.tecous.com
WARNING!
Before mounting the heater, make sure to install only heaters suitable for
chillers containing flammable gas (R290)
How to make sure:
1) check the name of the gas indicated on the technical label situated at the
back of the chiller. It can be R290 or R134A.
2) check the label on the Heater. There are two kind of heaters:
- KRES01# The heater that can’t be placed inside R290 chillers has the label:
“Warning, do not use with flammable gas R290” (img.1)
This heater can be placed inside R134a chillers.
- KRES02# The heater that must be placed inside R290 chillers has the label:
“OK, Suitable with flammable gas R290” (img.2)
If you don’t find one of these labels, please consider that the heater can’t be placed
in R290 chillers.
IMG.1
IMG.2
To Next Page
Loading...
