STEP n.
6
www.tecoonline.com | www.tecous.com
Restore the wiring in the following order:
1) Wifi connector into chiller metal cover (two little
screws)
2) Compressor connector
3) Probe connector
4) Hot, neutral and ground wires of power cord into wago
connector following already connected wires color
(black or brown wire with other brown wire, white or
blue wire to other blue wire and green or yellow-green
wire to yellow-green wire)
Then assemble dismounting parts following the indicated
sequence:
5) Four inox screw (fix the fan support on the
metal cover)
6) Conveyor
7) Air filter
8) Air filter grid
1 2
4 4
4
3
5
7
8
To Next Page
Loading...
