Need help?Do you have a question about the Tecsis P3297 and is the answer not in the manual?
General| Accessory Type | Pressure transmitter |
|---|---|
| Model | P3297 |
| Category | Accessories |
| Brand | Tecsis |
| Output Signal | 4...20 mA, 0...10 V |
| Process Connection | G1/4 |
| Electrical Connection | M12 |
| Protection Class | IP67 |
This pressure sensor is used for transforming the pressure into an electrical signal and may only be used accordingly.
Describes the qualification requirements for personnel handling the pressure sensor to prevent injury and damage.
Highlights warnings for hazardous media like oxygen, acetylene, flammable or toxic gases, and risks from residual media.
Explains the product label, including model, output signal, power supply, and safety certifications like CE and cULus.
Explains common symbols used in the operating instructions, such as warning, caution, and information icons.
Explains how the pressure prevailing in the application is transformed into a standardized electrical signal.
Details the completely assembled pressure sensors and ordered accessories included in the delivery.
Instructions for checking the pressure sensor for damage caused by transport and reporting any obvious damage immediately.
Advises not to remove packaging until just before mounting and to keep it for protection during transport or repair.
Specifies permissible storage conditions (temperature, humidity) and warns about residual media in dismounted instruments.
Provides detailed instructions and warnings for mounting the pressure sensor, including torque and thread handling.
Illustrates and names different types of sealings used with the pressure sensor, such as EN 837, DIN 3852-E, and NPT.
Details requirements for earthing, power supply circuits, cable selection, and securing connections for safe operation.
Step-by-step guide for assembling the DIN EN 175301-803 angular connector to the pressure sensor, including sealing and wiring.
Describes how to perform a functional test, checking the output signal proportionality and observing conditions.
States that the instrument is maintenance-free and repairs must only be carried out by the manufacturer.
Provides instructions for cleaning the pressure sensor, including disconnection, using a moist cloth, and handling residual media.
Instructs to disconnect the pressure sensor only after the system has been depressurised.
Emphasizes that all pressure sensors delivered to tecsis must be free from hazardous substances when shipping.
Warns that incorrect disposal risks the environment and advises environmentally compatible disposal according to regulations.
To Next Page