26 tecsis Operating Instructions - Pressure sensor P3297
BD_BE_BF_BSP 708 c
GB
The activities described in these operating instructions may only be carried
out by skilled personnel who have the qualifications described below.
Keep unqualified personnel away from hazardous areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology and
on their experience and knowledge of country-specific regulations, current
standards and directives, are capable of carrying out the work described and
independently recognising potential hazards. Special operating conditions
require further appropriate knowledge, e.g. of aggressive media.
2.3 Special hazards
WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic gases or
liquids, and refrigeration plants, compressors, etc., in addition to all standard
regulations, the appropriate existing codes or regulations must also be followed.
WARNING!
Residual media in dismounted instruments can result in a risk to persons, the
environment and the equipment. Take sufficient precautionary measures.
2.4 Labelling / safety marks
Product label (example)
2. Safety
For an explanation of
symbols, see below.
Output Signal
S #
PIN assignment
Power Supply
Serial No.
Coded manufacture date
To Next Page
Loading...