EasyManua.ls Logo

TecTake 403518 - Montage; Assembly

TecTake 403518
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Please note
To identify the various different parts, please see the parts list.
Please note: assembly requires two adults in good physical health. For their safety, they should
wear suitable shoes and clothing. Failure to follow the instructions can lead to injury. The
images may vary slightly between various trampoline models.
If locking nuts or screws are used, please make sure that these are not designed for
one-off use and need to be replaced.
The safety net should be replaced after 1 year at the latest.
A badly maintained trampoline increases the risk of injury. Please check the trampoline for
tears or worn-out areas on the mat and cover, bends in the frame, missing parts, loose or
broken springs and overall stability. Inspect the trampoline before each use.
Worn-out or defective parts must be replaced immediately. The trampoline should not be
used until completely refitted.
If the trampoline is not being used, please store it in a dry and clean place.
Dimensions:
Assembly
Model
Frame
height
Safety net
height
Total
diameter
Total height of frame
including safety net
403518
403519
403520
403521
403522
76cm
80cm
80cm
80cm
90cm
180cm
180cm
180cm
180cm
180cm
305cm
366cm
396cm
427cm
457cm
256cm
260cm
260cm
260cm
269cm
Montage