Need help?Do you have a question about the Tectro TBH 564 and is the answer not in the manual?
Identifies the viewing window, control panel, on/off switch, maintenance panel, and stove door.
Describes the pellet hopper, auger, brazier, and ash collection components for fuel management.
Lists key sensors (temperature, smoke, pressure) and the main circuit board.
Details the combustion air intake, smoke extractor, recirculation blower, and safety thermostat.
Details pre-start checks, initial firing, break-in procedures, and first smoke.
Explains the function of control panel buttons, LEDs, and display indicators.
Outlines the step-by-step process for starting the stove under normal conditions.
Describes alternative start-up procedures for specific conditions like low temperatures.
Guides users on how to adjust the desired room temperature via the control panel.
Explains how to adjust the stove's heating level using the control panel.
Describes the proper procedure for turning off the stove and its cooling phase.
Details how to use the remote control for various stove functions like temperature and modes.
Explains how to replace batteries in the remote control unit.
Lists user-performed maintenance tasks, their frequency, and important precautions.
Explains the procedure to clear error messages from the stove's display.
Details common error codes, their causes, and suggested solutions for troubleshooting.
To Next Page
General