Need help?Do you have a question about the Tecumseh AH-HSK600 and is the answer not in the manual?
General| Lubrication System | Splash |
|---|---|
| Governor Type | Mechanical |
| Carburetor | Float Type |
| Air Cleaner | Dual Element |
| Starter Type | Recoil |
| Oil Capacity | 0.6 L (0.63 US qt) |
| Spark Plug Gap | 0.030 in (0.76 mm) |
| Rotation | Counterclockwise (from PTO side) |
| Engine Type | 4-Stroke, Air-Cooled, OHV |
| Weight | 37 lbs (16.8 kg) |
Torque specifications for 840-850 and TC two-cycle engine series.
Torque specifications for TC two-cycle engine series.
Torque specifications for four-cycle light frame engines.
Torque specifications for four-cycle medium frame engines.
Troubleshooting steps for four-cycle engine fuel system issues.
Troubleshooting steps for four-cycle engine ignition system issues.
Procedures for adjusting diaphragm carburetors on 2-cycle engines.
Procedure for adjusting the governor on TC series engines.
Adjustments for Walbro and Tillotson diaphragm carburetors.
Procedure for fine-tuning the idle mixture on carburetors.
Adjusting speed and mixture for TVS/TVXL840 engines.
Adjustments for 3-5 HP vertical shaft engines.
Adjustments for 5-15 HP vertical shaft engines.
Procedure for setting the static governor.
Purpose and procedure for static governor adjustments.
Procedure for adjusting the governor on VLV models.
Procedure for adjusting governor on horizontal engines.
Checking and testing low oil shutdown switches.
Testing the low oil shutdown indicator light functionality.
Testing the low oil pressure sensor.
Testing the low oil sensor.
Testing and checking fuel shutdown solenoids.
Specifications for 3 Amp DC and 5 Amp AC alternator systems.
Troubleshooting for Peerless in-line shift transaxles.
Spark plug replacement for 4-cycle engines.
Spark plug replacement for 2-cycle engines.
To Next Page