Do you have a question about the Tecumseh HHM80 and is the answer not in the manual?
Fuel Type | Gasoline |
---|---|
Max RPM | 3600 RPM |
Engine Type | 4-Stroke, OHV, Air Cooled |
Starting System | Recoil |
Ignition System | Solid State |
Details warranty coverage and periods for new engines and electronic ignition modules.
Instructions on how to check and fill the engine oil level for safe operation.
Guidelines for filling the fuel tank with appropriate gasoline.
Pre-operation checks on equipment and engine safety features.
Step-by-step instructions for starting the engine using the recoil starter.
How to properly adjust remote control cables for engine and equipment.
Warning against tampering with the factory-set engine governor and speed.
Steps to drain the fuel system for long-term storage.
Instructions for draining the carburetor before storage.
How to check the engine oil level regularly.
Procedure for changing engine oil after initial use and at intervals.
Instructions for servicing the air filter system.
Details the warranty coverage period for emission control systems.
Outlines owner's duties regarding maintenance for warranty.
Detailed instructions for servicing foam and paper air filters.
Importance of cleaning cooling fins and air intake screen.
Details the warranty coverage period for emission control systems.
Outlines owner's duties regarding maintenance for warranty.
Pre-operation checks on equipment and engine safety features.
Step-by-step instructions for starting the engine using the recoil starter.
Instructions for starting the engine using the electric starter.
Steps to take after the engine has been shut off.
Details warranty coverage and periods for new engines and electronic ignition modules.
Detailed instructions for servicing foam and paper air filters.
Importance of cleaning cooling fins and air intake screen.
How to properly adjust remote control cables for engine and equipment.
Warning against tampering with the factory-set engine governor and speed.
Steps to drain the fuel system for long-term storage.
Instructions for draining the carburetor before storage.
Instructions for installing the tow bar kit on chipper shredders.
Instructions for removing the installed tow bar.
Details of the vacuum snout assembly components.
Details of the vacuum inlet cap assembly components.
Details of the rake-in tray assembly components.
Instructions for properly installing the gear shift lever cable.