To Next PageTo Next Page
Need help?Do you have a question about the Tecumseh HM70 and is the answer not in the manual?
General| Fuel Type | Gasoline |
|---|---|
| Power Output | 7 hp (5.2 kW) @ 3600 rpm |
| Ignition System | Magneto |
| Starting System | Recoil starter |
| Engine Type | 4-stroke, air-cooled, single cylinder |
Details on identifying engine models, serial numbers, and interpreting model number designations.
Information on short blocks, fuel recommendations, and engine oil types and capacities.
Guidance on engine tune-up procedures, proper storage, and oil change intervals.
Explains the function, operation, and components of air cleaning systems for engines.
Covers troubleshooting common air cleaner issues and service procedures for filter elements.
Details on servicing polyurethane-type and paper-type air filter elements.
Introduces float and diaphragm carburetors, their operation, and fuel system components.
Describes various carburetor series (1, 3, 4, 6, 8, 9, 10) and identification methods.
Covers testing, pre-sets, final adjustments, and disassembly procedures for carburetors.
Explains governor function, operation, internal components, and troubleshooting basics.
Details on engine overspeeding, surging, governor adjustment, and gear/shaft service.
Covers different types of speed controls, linkage adjustments, and RPM settings.
Information on rewind starter general information, operation, and components.
Covers rope service, retainer replacement, and disassembly/assembly procedures.
Details on battery, starting circuit, charging circuit, and basic electrical system operation.
Explains the operation and service procedures for electric starting circuits and starters.
Covers charging systems, AC to DC conversion, rectifiers, and specific alternator system checks.
Information on batteries, wiring, electrical terms, and basic system checks.
Details on voltage regulator function and low oil shutdown switch operation.
Explains flywheel brake systems, their operation, and components for safety compliance.
Covers service procedures for flywheel removal, brake components, and related switches.
Introduces solid state (CDI) and magneto ignition systems, their general information, and operation.
Details on identifying ignition systems and lists components for magneto ignition systems.
Covers testing procedures, spark plug service, and ignition timing for various systems.
Explains 4-cycle engine theory, lubrication, and counterbalance systems.
Details major internal engine components like cylinder block, crankshaft, valves, and flywheel.
Lists common engine operation issues including knocks, overheating, misfires, and power loss.
Covers engine disassembly procedures and general testing for various operational problems.
Procedures for checking, measuring, and re-sizing cylinders and servicing cylinder heads.
Details on checking piston, rings, and connecting rod assembly for wear and proper installation.
Guidelines for inspecting crankshafts and camshafts for wear and proper timing alignment.
Procedures for valve clearance, seating, grinding, and valve seat reconditioning.
Covers service for cylinder covers, oil seals, and crankshaft bearing maintenance.
Details on the counterbalance system alignment and flywheel service procedures.
Provides torque specifications for various engine components across different engine models.
Lists available technician handbooks, foreign language manuals, and video training programs.
Details special booklets for failure analysis, carburetor, ignition, and quick reference guides.
Lists specialized tools for engine service, including drivers, pullers, and gauges.
