12
3. SIDE MOUNTED STARTER VERTICAL ENGA-
GEMENT USA TYPE
NOTA - Alternative type starter above may also be fitted.
Disassembly:
- Before dismantling, the recoil spring must be locked by
inserting pin C. (Fig 20).
- Next remove taper pin as per Fig 21.
- Remove centre pin by means of a drift and hammer.
- The spring/gear assy may now be removed. (Fig 2).
Remove locking pin (Fig 20-C) and slowly release spring.
To replace:
- Spring: The new spring is supplied complete with
container and new taper pin, the old pin should never
be re-used.
- To detach rope, remove clip A (not to be used again).
(Fig 23).
Fig. 19
Fig. 22 Fig. 23
Fig. 21
Fig. 20
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
To Next Page
Loading...
Need help?
General
