Need help?Do you have a question about the Tecumseh OHSK110 and is the answer not in the manual?
Explains warning and note indicators for safety significance.
Advises reading manuals and using safety equipment for personal safety.
Details dangers of carbon monoxide and preventative measures.
Provides instructions to prevent injury or death from fuel fires.
Recommends adult supervision for fueling, maintenance, and operation.
Warns about entanglement hazards with rotating engine parts.
Assists in locating and recording engine model and specification numbers.
Explains how to interpret engine model and specification numbers for older models.
Explains the information contained on the engine ID label for models from 2004 onwards.
Details the breakdown and meaning of the specification number.
Explains how to find and interpret the production date on the engine ID label.
Explains the coding system for engine models effective from 2004.
Offers a chart to convert older model numbers.
Details service numbers and applicable models for 4-cycle engines.
Specifies the correct air gap for all Tecumseh spark plugs.
Lists service numbers for 2-cycle spark plugs and their associated models.
Details service numbers for spark plugs used in Europa models.
Recommends unleaded regular gasoline and lists acceptable alternatives and those to avoid.
Advises on storing fuel and using fuel stabilizers for short periods.
Outlines steps for preparing the engine for extended periods of non-use.
Discusses approved fuel additives and warns against methanol-based dryers.
Shows oil viscosity recommendations based on temperature and oil types.
Lists oil capacities for various 4-cycle engine models.
Lists steps to take before diagnosing 4-cycle engine issues.
Guides users through diagnosing fuel system issues when the engine won't start.
Provides a flowchart for diagnosing ignition system problems.
Lists recommended fuel to oil mix ratios for different 2-cycle engine models.
Describes the benefits of using Tecumseh's 2-cycle engine oil with fuel stabilizer.
Outlines steps to troubleshoot fuel system problems in 2-cycle engines.
Provides a troubleshooting flowchart for 2-cycle engine ignition system issues.
Addresses problems related to hard shifting and drive belt function.
Provides steps to diagnose and resolve issues where the unit appears to slip.
Details troubleshooting steps for reduced power and difficult shifting in LTH-2000 transaxles.
Addresses issues related to noisy transaxles and the unit not driving.
Guides on troubleshooting brake malfunctions and lubricant leaks.
Outlines steps to test the unit for power loss and assess if it's normal or excessive.
Covers potential problems like overheating, belt slippage, and fluid levels.
To Next Page
General
