To Next PageTo Next Page
Need help?Do you have a question about the Tecumseh OHV140 and is the answer not in the manual?
Explains the meaning of WARNING, CAUTION, and NOTE symbols used in the manual.
Details engine compliance with California and U.S. EPA emission regulations and control systems.
Provides contact details for engine adjustments, repairs, warranty service, and website.
Details the risks of carbon monoxide from engine exhaust and preventative measures.
Outlines safety guidelines to prevent fires and explosions related to gasoline.
Stresses the importance of adult supervision for safe engine operation and maintenance.
Warns about entanglement hazards with rotating engine parts and the need for proper guarding.
Warns against modifying the engine, particularly the governor, to prevent unsafe speeds.
Advises caution around hot engine components and keeping flammable materials away.
Details procedures to disconnect the spark plug and ensure the engine is off before maintenance.
Emphasizes the need for hearing protection due to engine noise levels.
Describes the engine identification decal and its purpose for recording model and specification details.
Informs about the availability of a Technician's Handbook for advanced engine servicing.
Specifies the correct type, quality, and quantity of oil for engine operation and maintenance.
Details the types of unleaded gasoline recommended and cautions against leaded fuel or alcohol.
Outlines the steps to check the engine oil level for proper lubrication and to prevent damage.
Details the procedure for adding the correct amount of oil to the engine's oil sump.
Provides safety instructions and steps for filling the engine's fuel tank with gasoline.
Step-by-step guide for starting engines with electric starters and combined speed/choke controls.
Steps for starting engines with electric starters and independent speed and choke controls.
Instructions for starting engines with recoil starters and combined speed/choke controls.
Steps for starting engines with recoil starters and independent speed and choke controls.
Provides instructions on how to properly stop the engine according to manufacturer's recommendations.
Details steps for preparing the engine for short-term storage, including cleaning and fuel management.
Guides on inspecting and changing the engine oil to ensure proper lubrication and longevity.
Instructions for clearing debris and servicing the air cleaner for optimal engine performance.
Details on inspecting, gapping, and replacing the spark plug for reliable ignition.
Advice on carburetor adjustments, high-altitude operation, and engine speed modifications.
Advises consulting a dealer for engine adjustments to maintain factory settings.
Guidelines for preparing the engine for short-term storage, including cleaning and fuel treatment.
Procedures for preparing the engine for long-term storage, focusing on fuel system and cylinder lubrication.
Details the scheduled maintenance tasks required after the first 2 hours of engine operation.
Outlines routine maintenance procedures and their recommended intervals, such as oil changes and filter cleaning.
General
