What to do if my Teeggi Quadcopter is shaking very badly?
If your Teeggi Quadcopter is shaking severely, it's likely that the blade is deformed or damaged. The suggested solution is to replace the blade.
What to do if Teeggi Quadcopter aircraft lights are always flashing and cannot be hovered?
If, after mode 1 takes off, the aircraft lights on your Teeggi Quadcopter are constantly flashing and it cannot hover, it might be due to a smooth ground surface or a dark environment. Try taking off in a location with good lighting and a non-reflective ground surface.
Why does my Teeggi Quadcopter always flash and cannot hover after mode 2 takes off?
If your Teeggi Quadcopter always flashes and cannot hover after mode 2 takes off, floating erratically, and the remote control switches between modes 1 and 2, it may be due to poor GPS positioning or significant interference. Try moving to an open space, free from obstructions and wires.
Key statements about the product's nature, user responsibilities, and suitability.
Essential safety guidelines for operating the drone to avoid accidents and ensure user safety.
Instructions on how to correctly install the drone's propellers for proper flight.
Procedure for performing gyroscope calibration for flight stability.
Steps for calibrating the geomagnetic compass for accurate navigation.
Guide to connecting the mobile app for aircraft control and features.
Overview of the aircraft's return-to-home functionality.
Important points to note during automatic return flights.
Using the dedicated button to initiate a return flight.
Automatic return triggered by loss of remote control signal.
Automatic return initiated when the aircraft battery is low.
Solutions for common problems encountered during aircraft operation.
General| Brand | Teeggi |
|---|---|
| Model | SG906 |
| Category | Quadcopters |
| Language | English |
To Next Page