www.teejet.com
User GUide
Connections Table and Assembly
Contact Color Description Contact Color Description
1 9 Brown +12v Speed Sensor
2 Wht/Grn SPEED signal 10 Green GND for speed sensor
3 Green Boom Sense input (+12v = work) 11 Yellow ALARM 2 output
4 12
5 Gray ALARM 1 output
6
7
8
Note: Boom Sense +12v supply MUST share the same ground as the console.
B o om S ense - GREE N
A la r m 2 - YEL L O W
A la r m 1 - G R A Y
SPEED
P
r o
CLR
70 S e r ie s
001-US
V1.11
P o w er C abl e
45-05268
T o B a t t e r y
71 S p eed A r ea M oni t o r
75-30010
M ain Ha r nes s
45-05429
P r o ximi t y
S enso r
16-40004
Pos Color Function
A Brown (+V)
B Wht/Grn Signal
Speed
3 pos. Deutsch Skt.
P o s C o l o r Fun c t i o n
A R e d ( + 12 V )
P o w er Suppl y
Functionality
Function Key Description
1. Power on
Pro
The unit will power on and show the Info screen.
Software name and Version are displayed.
001-US
V1.12
2. Power off
and
The unit will power off
3. Selection of working
screen
or
The rst line on display shows Speed (MPH)
Second line is user selectable (Distance, Area, or Total Area)
Example:000
Shows Upper line Speed (MPH / KPH) and Lower line
Distance (FT / M)
US Units
7.5MPH
105.7FT
Metric Units
12.0KPH
32.2M
4. Master On
Pro
The
Pro
key will act as the master switch and when pressed the console will begin to accumulate
area and distance.
NOTES: The master switch must be off to enter into setup
An external switch can be connected to the green boom sense wire to signal to the console
to start accumulating.
70 series
speed AreA Monitor
To Next Page
Need help?
General