EN
Owner’s manual
12
1. Battery compartment
2. Power/TARE button
3. Unit selection button
4. Display
5. Belt
PRODUCT DESCRIPTION
BATTERY INSTALLATION
1. Open the battery cover at the top of the scale.
2. Insert 2x AAA battery with correct polarization.
3. Close the cover.
Note: When the battery is low, battery indicator appears on the
display. Please replace the batteries with new ones.
TURN ON/OFF
Hold the scale upright. Press the power button. When the display
shows 0.00 it is ready to be used.
The scale will automatically turn o after 60 seconds after nishing
weighing. If you want to turn o the scale manually, press and hold
the power button.
1
2
3
4
5
To Next Page
Loading...
