17
EN
CLEANING
Clean the appliance after every use.
The bowl and the grid have a non-stick coating. Do not use metal kitchen utensils or
abrasive cleaning materials to clean them, as this may damage the nonstick coating.
1. Remove the main plug from the wall socket and let the appliance cool down. Note:
Remove the bowl to let the Easy Fry cool down more quickly.
2. Wipe the outside of the appliance with a damp cloth.
3. Clean the bowl and grid with hot water, some washing-up liquid and a non-abrasive
sponge.
You can use a degreasing liquid to remove any remaining dirt.
Note: The bowl and grid are dishwasher-safe.
Tip: If dirt is stuck at the bottom of the bowl and the grid, fill them with hot water
and some washing-up liquid. Let the bowl and the grid soak for approximately 10
minutes. Then rinse clean and dry.
4. Wipe inside of the appliance with hot water and a damp cloth.
5. Clean the heating element with a dry, cleaning brush to remove any food residues.
6. Do not immerse the appliance in water or any other liquid.
STORAGE
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
GUARANTEE AND SERVICE
If you need service or information or if you have a problem, please visit the Tefal website at
www.tefal.com or contact the Tefal Consumer Care Centre in your country. You can find the
phone number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in
your country, go to your local Tefal dealer.
TROUBLESHOOTING
If you encounter problems with the appliance, visit www.tefal.com for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
To Next Page
Loading...
Need help?
General
