EasyManuals Logo

TEFAL Easy-Fry Manual

TEFAL Easy-Fry
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
EN
1918
4. Press on the touchpanel screen the key of the desired cooking mode (these modes are
described in detail in the “Cooking guide” section).
5. Confirm the cooking mode by pressing the Start button
. This will launch the cooking
process.Cooking starts. The selected temperature and remaining cooking time will alternate
on the on-screen display.
6. Excess oil from the food is collected in the bottom of the bowl.
7. Some foods require shaking halfway through the cooking time (see ‘Cooking Guide’). To
shake the food, pull the bowl out of the appliance by the handle and shake it. Then slide the
bowl back into the appliance and press Start button again to restart cooking.
8. When you hear the timer sound, the cooking time set has finished. Pull the bowl out of the
appliance and place it on a heat-resistant surface.
9. Check if the food is ready.
If the food is not ready yet, simply slide the bowl back into the appliance and set the timer
for a few extra minutes.
10. When the food is cooked, take out the bowl. To remove food, use a pair of tongs to lift the
food out of the bowl.
Caution: The bowl should never be turn up side down with the grid.
After hot air frying, the bowl, the grid and the food are very hot. Depending on the type of
food cooked in the appliance, be careful as steam may escape from the bowl.
11. When a batch of food is ready, the appliance is instantly ready for preparing another batch of food.
NOTE: The following cooking programs cook with steam. Fill in the water
tank to the maximum level with water before launching one of this cooking program.
We recommend to use purified water.
USING THE AIR FRY MODE
1. Place the food in the bowl.
2. Slide the bowl into the appliance.
3. Press
and then press on the touchscreen panel.
4. Adjust the temperature
with the and buttons on the digital screen. The thermostat
varies from 80-200°C (176°F - 392°F).
5. Then set the desired cooking time by pressing the
button and adjusting the time with
the
and buttons. The timer can be set for between 0 and 60 minutes.
6. Press the Start button
to launch the cooking with the selected temperature and
time settings. Cooking starts. The selected temperature and remaining cooking time will
alternate on the screen display.
7. Excess oil from the food is collected in the bottom of the bowl.
8. Some foods require shaking halfway through the cooking time (see ‘Cooking Guide’). To
shake the food, pull the bowl out of the appliance by the handle and shake it. Then slide the
bowl back into the appliance and press Start button again to restart cooking.
9. When you hear the timer sound, the cooking time set has finished. Pull the bowl out of the
appliance and place it on a heat-resistant surface.
10. Check if the food is ready.
If the food is not ready yet, simply slide the bowl back into the appliance and set the timer
for a few extra minutes.
11. When the food is cooked, take out the bowl. To remove food, use a pair of tongs to lift the
food out of the bowl.
Caution: The bowl should never be turn up side down with the grid.
After hot air frying, the bowl, the grid and the food are very hot. Depending on the type of
food cooked in the appliance, be careful as steam may escape from the bowl.
12. When a batch of food is ready, the appliance is instantly ready for preparing another batch of food.
USING THE STEAM MODE
1. Before use of the Steam mode, fill in the water tank to the maximum level with water only.
We recommend to use purified water.
2. Make sure the water tank’s cap is in place and locked .
3. Put the water tank back in place.
4. Place the food in the bowl and put the bowl into the appliance.
5. Press
and then press on the touchscreen panel.
6. The default cooking time is 25 minutes. Adjust the desired cooking time by pressing
and
buttons (see into section ‘Cooking Guide’ section).
7. Start the Steam mode by pressing
. This will launch the cooking. The selected temperature
and remaining cooking time will alternate on the on-screen display.
8. When you hear the timer sound, the cooking has finished. Open the appliance, take the
bowl out the appliance and place it on a heat-resistant surface.
9. Check if the food is ready. If the food is not ready yet, put it back on the appliance and set
the timer for a few extra minutes.
Note : To cook steamed vegetables, you can directly select the cooking program
.
The temperature and cooking time will be automatically set up.
Note : When
is flashing, it indicates that water is missing in the tank. Refill the water
tank with water. We recommend to use purified water.
USING THE GRILL MODE
1. Place the grill plate in the bowl of the appliance.
2. Press
, then press on the screen to select the Grill mode.
3. Start the Grill mode by pressing
. This will launch the preheating phase. is blinking
during this preheating phase. This preheating phase lasts 15 minutes.
4. When you hear the timer sound, the preheating phase has finished.
5. Take the bowl out the appliance and place it on a heat-resistant surface.
6. Place the food on the grill plate and put back the bowl into the appliance.
7. The default cooking time is 4 minutes. Adjust the desired cooking time by pressing
and
buttons (see into section ‘Cooking Guide’ section).
8. Press the Start button
to launch the cooking. The selected temperature and remaining
cooking time will alternate on the on-screen display.
9. When you hear the timer sound, the cooking has finished. Take the bowl out the appliance
and place it on a heat-resistant surface.
10. Check if the food is ready. If the food is not ready yet, put it back on the appliance and set
the timer for a few extra minutes.
11. When the food is cooked, take out the bowl. To remove food, use a pair of tongs. Caution :
After hot frying, the bowl, the grid and the food are very hot.
Place the food in the metal holder.
Never cut food directly on the accessory.
Ensure that the metal holder is stable, well positioned and correctly placed on the appliance.
Caution : accessories become very hot during cooking. Use heat-resistant oven gloves when
handling accessories after cooking.
Do not place the hot accessory on a fragile surface. Only place it on a heat-resistant surface.
USING THE METAL HOLDER

Other manuals for TEFAL Easy-Fry

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TEFAL Easy-Fry and is the answer not in the manual?

TEFAL Easy-Fry Specifications

General IconGeneral
Power1500 W
Non-Stick CoatingYes
Temperature Range80°C - 200°C
Control TypeDigital
Dishwasher Safe PartsYes
TypeAir Fryer
Capacity in kg1.2 kg
Temperature ControlYes

Related product manuals