EN
1716
D
C
A
B
E
G J
H
F
I
DESCRIPTION
A. Water tank
B. Water tank cap
C. Time/temperature display
D. Digital touchscreen panel
E. Bowl
F. Bowl handle
G. Regular grid
H. Die-cast grill grid
I. Water tray
J. Metal holder
AUTOMATIC COOKING MODES
1. Fries
2. Chicken
3. Nuggets
4. Dumpling
5. Roast
6. Vegetables
7. Cake
BEFORE FIRST USE
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Do not remove silicon pads of the grid.
4. Thoroughly clean the bowl, the water tank and the removable grids with hot water, some
washing-up liquid and a non-abrasive sponge.
Warning: the bowl, the grids and the water tank are not dishwasher safe.
5. Before first use, press
to launch the purge of the water circuit in order to remove residual
water from the water circuit.
6. Wipe the inside and outside of the appliance with a damp cloth. The appliance works by
producing hot air or steam. Do not fill the bowl (E) with oil or frying fat.
PREPARING FOR USE
1. Place the appliance on a flat, stable, heat-resistant work surface away from water splashes.
2. Do not fill the bowl with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and affects the
hot air frying result.
The appliance can cook a large range of recipes. Cooking times for the main foods are given in
the section ‘Cooking Guide’. Online recipes at www.t-fal.com help you get to know the appliance.
USING THE AUTOMATIC COOKING MODES
1. Connect the power supply cord to an electrical socket.
2. Place the food in the bowl.
Note: Never fill the bowl beyond the MAX level mark or exceed the maximum amount
indicated in the table (see into section ‘Cooking Guide’), as this could affect the
quality of the end result.
3. Slide the bowl back into the appliance.
Caution: Do not touch the bowl during use and for some time after use, as it gets very
hot. Only hold the bowl by the handle.
To Next Page
Loading...
Need help?
General
