23
EN
PROBLEMS CAUSES SOLUTIONS
Excessive vibrations
The appliance has not
been placed on a flat
surface; the appliance is
not stable.
Place your appliance on a
stable,flat heat-resistant,
clean, and dry surface.
Volume of ingredients is
too high.
Reduce the quantity of
ingredients processed.
Leak at the top of
the jug.
Overflow sensor (C) is
clogged up.
Clean sensor (C).
Volume of ingredients is
too high.
Reduce the quantity of
ingredients processed.
Poorly-mixed
preparations.
Pieces of food are too
large or too hard.
Reduce the size or quantity of
ingredients processed.
Stop the motor using
the motor overload
protector.
Leave your product to cool
down for at least 20 minutes
and reduce the size or quantity
of ingredients processed.
Add liquid.
The appliance has
cut the electricity
supply.
Appliance is damp.
Leave the appliance to dry
for 24 hrs before trying to
connect again.
Your appliance
continually beeps
and all the LEDs are
flashing.
Fouled up overflow sensor
(C)
Your appliance is
equipped with a level
sensor (C).
Clean the sensor (C)
Reduce the quantity of
ingredients.
To Next Page
Loading...
