3
EN
FR
KO
TH
AR
FA
HK
RC
VI
EL
If there is a problem?
PROBLEM POSSIBLE CAUSES SOLUTIONS
Brown water is dripping from the
soleplate and soiling your clothes.
You are using chemical descaling
products.
Do not put any descaling product into
the water tank.
You are not using the right water. Perform a self-clean and consult the
"What water to use?" section.
The soleplate is dirty or brown and
may soil clothes.
The temperature is too high. Clean the soleplate as indicated in the
user guide Use a lower temperature.
Your iron produces little or no steam. Your iron has limescale. Clean the anti-limescale valve and
perform a self-clean.
The soleplate is scratched or
damaged.
You have positioned your iron flat on
the metallic iron support.
You have cleaned your soleplate with
an abrasive cloth or steel wool.
Always place your iron in the support
base Clean the soleplate as indicated
in the user guide.
Your soleplate emits particles.
Water drips from the holes in the
soleplate.
Limescale is starting to build up on
your soleplate.
You are using steam while the iron is
not hot enough.
Perform a self-clean .
Wait until the thermostat light goes
out.
To Next Page
Loading...
Need help?
General
