17
• An audio signal (long
beep) sounds at the
end of the descaling
procedure.
• The unit will shut down
automatically. You must
then unplug the unit.
• Unlock and remove the
anti-calc collector in the
back of the iron to rinse
it.*
• Next, reposition the
collector, as well as the
removable stand.*
• Press the blinking
«Anti calc» button for
3 seconds.
• The descaling operation is
performed, during which
the iron emits water and
steam for 2 minutes. Be
aware of the heat of the
iron during the descaling
cycle.
• If you do not have
the model with the
removable stand, than
hold your iron above the
sink.
MAINTENANCE AND STORAGE
OFF
biiiip
3
sec
2 MIN
*
*
To Next Page
Loading...
