Need help?Do you have a question about the TEFAL Freemove Air and is the answer not in the manual?
General| Power | 2400 W |
|---|---|
| Steam Boost | 115 g/min |
| Water Tank Capacity | 250 ml |
| Soleplate | Durilium AirGlide |
| Anti-Drip | Yes |
| Auto-Off | Yes |
| Vertical Steam | Yes |
| Self-Cleaning | Yes |
| Anti-Calc System | Yes |
| Weight | 1.3 kg |
| Cord Length | N/A (Cordless) |
Read instructions carefully before first use; designed for domestic and indoor use only.
Initial use may produce smoke, odor, or particles which are harmless and disappear quickly.
Place the iron on its base during resting periods, not on its heel or flat.
Use untreated tap water; avoid distilled/demineralized water to prevent damage.
Unplug the iron, open the cover, fill to the 'MAX' mark, and close the cover.
Adjust temperature and steam controls based on fabric type using the provided table.
Hold the trigger for continuous steam; release to stop steam flow.
Set temperature for fabric and steam control to 'no steam' position.
Set the thermostat control to 'MAX' or '...' for increased steam.
Hang item, set thermostat to 'MAX', use steam boost periodically.
Press spray button to moisten clothes; ensure water is in the tank.
Do not lay the iron on its heel or flat during resting periods, but on its base.
Unplug, cool (1 hr), empty tank, set steam to anti-calc, wrap cord around base.
Iron powers off after 8 mins of inactivity on base; remove from base to restart.
Heat iron on base with full tank, max thermostat; place over sink and drain.
Clean warm soleplate with a damp cloth; never use chemical or abrasive products.
Guide for common problems like leaking, staining, or no steam, with causes and solutions.
To Next Page
