13
ENCONTROL PANEL
1. START KEY
• Press to start the cooking process.
2. MENU KEY
• Under standby status, press the “Menu” key to cycle through the
following functions: Soup BoilingBakingStew/Slow CookSteam
Frying Rice/Cereal Pilaf/Risotto Oatmeal/Porridge Jam
Pasta/PelmeniYogurtCottage CheeseBread rising Reheat.
• The screen displays the default cooking time of each function (except
“Rice”, “Pilaf/Risotto” mode ). “Start” indicator (Red) and “Keep Warm/
Cancel” (Green) flash and the linked function lights up.
Note:
You can long press the “Menu” key to cancel the “beep” sound if needed
(until the long beep sound). If you want to start the beep sound again,
press the “Menu” key for a second time.
3. “Delayed Start” KEY
• To use the delayed start function, choose a cooking program and the
cooking time first. Then, press the “Delayed start” key and choose the
preset time. The default preset time will change depending on the
selected cooking time. The Range of preset is from the cooking time up
to 24 hours. Each press of “<” and “>” key can increase or decrease the
delayed start time.
• When you have chosen the required preset time, press the “Start” key to
enter cooking status, the “Start” indicator will remain on and screen will
display the number of hours you have chosen.
4. < / > KEYS
• Use these buttons to adjust the cooking time (+/- 1, 5 or 15 mins) and
preset time (+/- 5 mins). You cannot adjust the cooking time in “Rice”,
“Pilaf/Risotto” mode and cannot adjust the preset time in “Crust/
Fry”,”Pasta/Pelmeni”, “Yogurt”, “Cottage Cheese” ,”Bread rising”mode.
5. Keep Warm/Cancel KEY
• In standby mode, press the “Keep warm/Cancel” key to heat your food
and keep it warm.
• Press the “Keep warm/Cancel” key to stop the cooking process or cancel
all settings. The Multicooker will return to standby mode.
• See details in “Keep warm/Cancel” function description.
To Next Page
Loading...
Need help?
General
