14
To store your NutriCook
• Turn the lid over and place it on the NutriCook body.
Safety
• Your NutriCook is provided with a number of safety mechanisms.
Lid closure safety
• The jaws should be in contact with the lid edge. If this
is not the case, then steam will leak from around. The
pressure indicator and NutriCook will never come up
to pressure.
Opening safety
• While NutriCook is under pressure, the open/close
handle cannot be activated as the mechanism is
locked down by the pressure indicator.
• In this case, never attempt to force the NutriCook
open, but move the selector to to the pressure
indicator drops (D) back down before opening
your NutriCook.
Excess pressure safety features
• NutriCook has two excess pressure safety features:
• First feature: the safety valve (M) releases pressure
and the steam will escape under the control
module. Fig. 19.
• Second feature: the seal (H) lets steam escape
between the lid and the base. Fig. 20.
• If one of the two excess pressure safety systems is
triggered:
- Turn off the heat.
- Do not move the cooker or turn the
programme selector (F) to the steam release
position.
- Allow the NutriCook to cool down completely
by standing at room temperature.
- Open it up.
- Check and clean the operating valve (L), the
steam release oultet (A), the safety valve (M)
and the seal (H).
To Next Page
Loading...
Need help?
General
