17
PREPARING THE FRYER
The fryer can be completely dismantled. Fig. 5
• Remove the lid. Remove the frying basket, the control unit and the
bowl. Remove the oil box by positioning the Oil box control button
on the Oil box position. Fig. 9
• Clean the lid, the bowl, the housing, the frying basket and the Oil box
with soap and water or put them in the dishwasher. Fig. 6
• Clean the control unit separately with a damp cloth.
• Dry thoroughly.
• After cleaning, press on the valve under the fryer to release any
water in the bowl. Fig. 7
• Position the bowl and the control unit. Fig. 8
• Place the Oil box control button on the Oil box position and insert
the empty Oil box into the fryer. Fig. 9
• Turn the control button to the Fry position. Fig. 13
• Completely unfold the basket handle; a “click” indicates that it is
correctly positioned. Fig. 10
IMPORTANT
Check that the valve has been reset to its initial position.
IMPORTANT
Make sure that the control unit is correctly positioned otherwise
the fryer cannot function.
• Ensure that the oil box is in place and empty.
• Place the Oil box control button on the Fry position. Fig. 2
• Fill the bowl with oil. We recommend that you use oil.
• The oil level should always be between the MIN and MAX level of
the bowl. Fig. 11
• Do not exceed the maximum fill line as boiling oil may overflow
during frying and can cause severe burns.
MONTAGENEW OLEOCLEANPRO NC00137570.indd 17 19/10/16 17:02
To Next Page
Loading...
Need help?
General
