Before cooking
7
8
If the pressure indicator pin has not
risen and no steam is released from the
valve during cooking:
■ This is normal for the first few minutes.
If this persists check that:
■ The heat setting is high enough. If not turn it up.
- There is enough liquid in the pan.
- The pressure regulator valve is set to or
or or *.
- The Pressure Cooker is properly closed.
- The gasket and the rim of the pan are not damaged.
If the pressure indicator pin has risen and
no steam is released from the valve during
cooking:
■ Put your Pressure Cooker under cold water to
release the pressure.
■ Clean the pressure regulator valve and the steam
outlet and check that the safety valve can be
depressed easily.
■ Before each use, lift off the pressure regulator
valve and check, in daylight, to see that the steam
outlet is not blocked. If necessary, clean with a
toothpick.
■ Fit the pressure regulator valve and select the
position as indicated in your recipes.
■ Place the Pressure Cooker on the hob turned to a
high setting.
*depending on model
4137-4133368VITALY-M4.qxp 3/12/04 15:48 Page 8
To Next Page
Loading...
