27
There is no steam or there is
little steam.
The water tank is
empty (red light on).
Fill the water tank.
The steam output control dial is
set at minimum.
Increase the steam output (control dial on the
control panel).
The soleplate temperature is set to the
maximum.
The generator is working but steam is very hot and dry. As
a consequence, it is less visible.
The red “water
tank empty” light is on.
The water tank is empty. Fill the water tank.
Steam escapes from the anti-
scale valve plug
The anti-scale valve plug has not been
tightened correctly.
Tighten the anti-calc valve plug correctly.
The anti-scale valve plug is damaged. Contact an Approved Service Centre to order a new anti-scale
valve.
Steam or water escapes under
the appliance.
The generator is faulty. Stop using the generator and contact an Approved
Service Centre.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert help and advice:
0845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
GB
To Next Page
Loading...
