Need help?Do you have a question about the TEFAL RG7675WH and is the answer not in the manual?
General| Brand | TEFAL |
|---|---|
| Model | RG7675WH |
| Category | Vacuum Cleaner |
| Language | English |
Connects power cord to socket and adapter to docking station.
Place station with clearance, away from stairs, on a hard floor.
Align robot's charging plate with station's plates to initiate charging.
Keep robot docked when not in use. Charge fully and store in a cool, dry place if unused.
Detects stairs/gaps to change direction. Ensure floor is clear near stairs.
Press and hold the power button for 3 seconds to activate the robot.
Press button to start cleaning. Buttons illuminate white during normal operation.
Press button again to pause, and again to resume cleaning.
Robot automatically docks for charging when cleaning is complete or battery is low.
Press and hold button for 3 seconds to start localized cleaning mode.
Red indicator means low battery. Robot requires >30% charge to operate.
Download the app for full features and follow instructions for robot control.
Purple blinking indicates ready to connect; white solid indicates Wi-Fi is connected.
Visual icons representing various maintenance tasks.
Clean charging contacts and electrode plates weekly. Turn robot off first.
Clean sensors (wall, anti-collision, drop, infrared) with a dry, soft cloth.
Remove, empty, and clean dust bin and filters. Rinse with water and dry for 12 hours.
Continue cleaning dust bin and filters. Empty after each use, clean weekly.
Turn off robot, turn upside down, unlock brush guard using two lockers.
Remove brush guard, pull out brush. Clean brush with blade and brush sides.
Unscrew side brush, clean with brush. Clean side brushes monthly.
Replace side brushes every 6 months. Screw new brushes onto the robot.
Clean wheels weekly. Remove hair/debris from wheel shaft.
Schedule for cleaning and replacing robot components like dust collector, filters, brushes.
Detailed schedule for cleaning and replacing parts in multiple languages.
Replace pleated and foam filters every 6 months for optimal performance.
Do not discard robot with waste. Always wear gloves and protection.
Steps to disassemble: remove covers, bumper, body, battery, and unplug connector.
Red indicator blinks on failure. Check app for specific error code.
Solutions for common errors: stuck bumper, wheels, brushes, trapped robot.
Errors related to sensors (laser, fall), battery, motor, and water pump.
Solutions for robot not starting, stopping, or not charging.
Resolving errors for laser sensors, wheels, brushes, and water pump.
Solutions for robot not turning on, stopping, or failing to charge.
Solutions for charging, overheating, docking, and Wi-Fi connection issues.
Errors related to battery, wheel modules, side brushes, and main brush.
Errors for water pump, laser sensor, fan, and general robot malfunctions.
Troubleshooting laser sensors, proximity to forbidden zones, and general robot errors.
Resolving specific error codes for battery, wheel modules, side brushes, main brush.
Laser sensor errors, forbidden zones, and general robot issues.
Measure dust collection performance via app remote control.
To Next Page