13
DIY FUNCTION
• Press “Keep warm/Cancel” key under standby status, the light of “Keep
warm/Cancel” lights up, the screen shows “00:00” and the screen will
start to count the time of keeping warm.
• Press “Keep warm/Cancel” key under function setting or cooking status
will cancel all setting data and back to standby status.
• You can remove the automatic keep warm for the next cooking only by
pressing the “Keep warm/Cancel” key for 5 seconds. The light of “Keep
warm/ Cancel” light off. If you want to set automatic keep warm, press
again the key for 5 seconds.
Recommendation: in order to keep the food in good taste, please limit
the holding time within 12h.
KEEP WARM/CANCEL FUNCTION
• Press «Menu» key to select function «DIY» and the rice cooker will first
enter “DIY” setting status with the screen displaying the default cooking
time and the cooking temperature, and the light of “Start/Stop” flickers
red and the light of “Keep warm/Cancel” flickers green.
• You can adjust a constant temperature level and cooking time if
needed. Press «Temperature / Cooking time» key to active the time
setting function and then press «<» and «>» to change the cooking time.
Press again «Temperature / Cooking time» to change the temperature
by pressing «<» and «>».
• Press “Start/Stop” key. The rice cooker enters into “DIY” cooking status
with the light of “Start/Stop” lighting up and the screen displaying the
remaining cooking time and the cooking temperature.
• At the end of cooking, the buzzer will ring several “bip”.
Note:
• The rice cooker can memorize the last temperature and cooking
time DIY setting for your next use. After a simultaneous long press
on both “<” and “>” the rice cooker “bip” and come back to default
temperature and default cooking time.
• To protect the appliance, there is a temperature/time setting
restriction in DIY function :
Between 40-100°C, the cooking time range is 5min -9h
Between 110-160°C, the cooking time range is 5min -2h
• Temperature (variances +/-10°C) can be expected at times.
To Next Page
Loading...
