ENGLISH
Read the instructions and carefully fol-
low the operating method.
Unpack the appliance
• Remove the appliance from the packa-
ging and unpack all the accessories.
• Open the lid by pressing the opening
button located on the handle.
• Remove all the printed documents and
the accessories.
• Remove the non-stick bowl.
• Clean the metal parts of the lid and the
bowl with a sponge and washing-up
liquid. Fit the steam shield onto its
fixing axis - Fig. 1. Wipe the outside of
the appliance with a damp cloth.
• Dry off carefully.
Before the first use
Measuring the ingredients - Max capacity of the container
• The graduated markings on the inside
of the bowl are given in litres and cups
Fig. 7, these are used for measuring
the amount of water when cooking rice.
If cooking other foods, such as pasta,
follow the quantities in the recipes.
• The plastic cup provided with your
appliance is for measuring rice and the
table states the quantity of rice required
for the number of servings. 1 level
measuring cup of rice weighs 150 g.
The plastic cup is only used for
measuring rice and not the water
(except when cooking 1 cup of rice).
• The table on page 6 gives a guide to
cooking white rice. For best results, we
recommend using ordinary rice rather
than 'easy cook' type rice which tends
2
1
7
Install the spoon support - Fig. 2
• Insert the plastic hook of the support in
the hole located under the lid lock of the
lid, and slide it downwards.
This appliance has three cooking
functions: rice cooking, slow cooking,
and steam cooking.
For all 3 functions:
• Carefully wipe the outside of the bowl
(especially the bottom). Make sure
that there are no foreign residues
underneath the bowl and on the hot-
plate - Fig. 3
• Place the bowl into the appliance,
making sure that it is correctly positio-
ned - Fig. 4
• Slightly rotate the bowl in both direc-
tions, so as to ensure good contact
between the bottom of the bowl and the
hotplate.
• Make sure that the steam shield is cor-
rectly in position.
• Close and lock the lid - Fig. 5
• Check that the condensation collector
is correctly in position.
• Plug in the appliance.
• Do not switch on the appliance until all
of the above stages have been comple-
ted.
Never place you hand on the
steam vent during cooking, as there is a
danger of burns. - Fig. 6
If the bowl is not properly in place
in the appliance, cooking cannot com-
mence.
If you wish to change the selected
cooking time in the event of an error,
press cancel . Select the cooking mode
again and then the cooking time.
Press Start to begin the cooking pro-
cess.
PREPARATION
USING YOUR 3 IN 1 RICE COOKER
RICE COOKING
4
To Next Page
Need help?
General
