3
• Clean the pot, the valve and the inner lid with a sponge and washing
up liquid.
• Wipe the outside of the appliance and the lid with a damp cloth.
• Dry off carefully.
• Put all the elements back in their original position. Install the inner lid
in the right positions on the top lid of machine. Then, put the inner
lid behind the 2 ribs and push it on the top until it’s fixed. Install the
detachable cord into the socket on the cooker base.
FOR THE APPLIANCE AND ALL FUNCTIONS
• Carefully wipe the outside of the pot (especially the bottom). Make sure
that there are no foreign residues or liquid underneath the pot and on
the heating element – fig.5.
• Place the pot into the appliance, making sure that it is correctly
positioned – fig.6.
• Make sure that the inner lid is correctly in position.
• Close the lid in place with a sound of “click”.
• Install the power cord into the socket of the multicooker base and then
plug into the power outlet. The appliance will ring two sounds “Bip”, all
the indicators on the control box will light up for an instant. The rice
cooking mode is set the default cooking program.
• Do not touch the heating element when the product is plugged or after
cooking. Do not carry the product in use or just after cooking.
• This appliance is only intended for indoor use.
• If you want to cancel or add the “bip” sound, press “Menu” key for 5
seconds. Even if the “bip” sound are cancelled, the “bip” for start and end
of cooking are always ringing.
• If you want to change the time and temperature setting during the
cooking, press “Temperature/Cooking time” key and rechoose your time
and temperature by pressing “<” and “>”. After 5 seconds without any
action, the rice cooker will start cooking according new setting.
• You can stop the cooking by a short press on “Start/Stop” key. If you
want to switch off your rice cooker, have a long press on “Start/Stop”
key. Press any key to switch on your appliance.
Never place your hand on the steam vent during cooking, as there is a
danger of burns – fig.10.
After start the cooking, if you wish to change the selected cooking
menu because of an error, press «KEEP WARM/CANCEL» key and re-
choose the menu you want.
To Next Page
Loading...
