TEFAL Smart&light CM600 Series - OTHER FUNCTIONS; Delayed Start (PROG); Aroma Function (Pre-Infusion)

21
EN
OTHER FUNCTIONS
–DELAYED START (PROG)
Setting the time of the Delayed Start
• Your appliance features a delayed start program.
• Make sure that the clock is set to the correct time. If this is not the case,
follow the instructions in the section PROGRAMMING THE CLOCK.
• Press the PROG button (K) to set the automatic start time. The PROG
icon will appear on the display. Fig. 11.
• Set the time by pressing the HR button (L) for the hours and MIN
(M) button for the minutes. Fig. 12. The time setting is automatically
confirmed after approximately 5 seconds or by pressing the PROG (K)
button. Fig. 13.
• Your coffee maker will start automatically at the programmed time.
You can view the programmed time at any time by pressing the PROG
button (K).
• To cancel the delayed start, hold down the PROG (K) button for 5
seconds.
–PRE-INFUSION MODE - AROMA FUNCTION
Please note: The AROMA function gets the most from the coffee flavours
thanks to the grind pre-infusion phase.
• Press the AROMA (N) button before starting the coffee cycle to start the
PRE-INFUSION mode.
• The AROMA indicator light turns on. Fig. 14.
• To cancel the PRE-INFUSION mode, press the AROMA (N) button again.