TEFAL Speedy Cook - Cooking Programs; Stew Program

5352
EN
COOKING PROGRAMS TABLE
Cooking program
icon
Cooking program
name
Default cooking
time
Adjustable time
Default
temperature
Adjustable
temperature
Default pressure
Delayed start from
10min to 12h
Keep warm up to 24h
Lid status
Lid closed and
locked
Lid closed
but not locked
Lid open
Stew 30min
from
5min
to 2h
114C No 70Kpa Yes Yes
•
Stir-fry 10min
from
1min
to 1h
160C
Yes
from
140C to
160C
No No No
•
Soup 12min
from
1min
to 2h
114C No 70Kpa Yes Yes
•
Steam 7min
from
1min
to 1h
114C No 70Kpa Yes Yes
•
Rice 8min
from
1min
to 2h
114C No 70Kpa Yes Yes
•
Beans 30min
from
5min
to 2h
114C No 70Kpa Yes Ye s
•
Porridge 15min
from
1min
to 2h
100C No No Ye s Yes
•
Yogurt &
Ferment
8h
from
1h to
24h
38C
Yes
from
22C to
40C
No No No
•
Bake 30min
from
5min
to 2h
160C
Yes
from
100C to
160C
No Ye s Yes
•
Adjustable
Chef Mode
30min
from
5min
to 4h
80C
Yes
from
40C to
160C
No No No
• • •
Reheat 4min
from
1min
to 1h
95C No No Ye s Yes
•
Note: When cooking, you may notice slight steam leakage from
the lid, especially from the pressure limit valve. This is normal
and occurs when pressure builds up.
Please refer to the figures from Quick Start Guide
(from Fig.25 to Fig.36)
Stew program
• Place the ingredients in the cooking pot and completely close
and lock the lid.
• Press Stew program button
. The screen displays the default
cooking time.
• Optional: Set the desired time by pressing (to decrease time)
or (to increase time).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen displays
alternatively & and the pre-heating light indicator
turns on.
• When the pre-heating phase is completed, the appliance swit-
ches automatically to cooking phase. The screen displays the
count down and the cooking in progress light indicator turns
on.
• During cooking process, pressure builds up in the appliance
and pushes the float valve up. The under pressure light
indicator turns on to notify that the lid cannot be opened
without releasing the pressure first.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch
to keep warm phase. The screen displays and the keeping
warm light indicator turns on.
• Press for 3 seconds to stop the program at any time.