5554
EN
Stir-fry program
• Press Stir-fry program button
. The screen displays the de-
fault cooking time.
• Optional: Set the desired time by pressing
(to decrease time)
or (to increase time).
• Optional: Set the desired temperature by pressing
the set
temperature light indicator turns on and the screen displays
the default temperature. Then press (to decrease tempera-
ture) or (to increase temperature).
• Press
to start the cooking program.
• The appliance starts the pre-heating phase. The screen
displays alternatively
& and the pre-heating
light indicator turns on.
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen
displays the count down and the cooking in progress
light indicator
turns on.
• Place the ingredients in the cooking pot and keep the lid open
to stir-fry.
• At the end of the count down, the appliance beeps and the
screen displays
.
• After a few seconds, the appliance will automatically switch to
standby mode. The screen displays
.
• Press
for 3 seconds to stop the program at any time.
Soup program
• Place the ingredients in the cooking pot and completely close
and lock the lid.
• Press Soup program button
. The screen displays the default
cooking time.
• Optional: Set the desired time by pressing
(to decrease time)
or (to increase time).
• Press
to start the cooking program.
• The appliance starts the pre-heating phase. The screen dis-
plays alternatively
& and the pre-heating light
indicator turns on.
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen dis-
plays the count down and the cooking in progress light
indicator
turns on.
• During cooking process, pressure builds up in the ap-
pliance and pushes the float valve up. The under pressure
light indicator
turns on to notify that the lid cannot be ope-
ned without releasing the pressure first.
• At the end of the count down, the appliance beeps and the
screen displays
.
• After a few seconds, the appliance will automatically switch
to keep warm phase. The screen displays
and the keeping
warm light indicator turns on.
• Press
for 3 seconds to stop the program at any time.
Steam program
• Place 150ml of water ( 3⁄4 cup) in the cooking pot, place the tri-
vet at the bottom of the cooking pot and put your ingredients
on it. Completely close and lock the lid.
• Press Steam program button
. The screen displays the de-
fault cooking time.
• Optional: Set the desired time by pressing
(to decrease time)
or (to increase time).
• Press
to start the cooking program.
To Next Page
Loading...
