What to do if the anti calc indicator is flashing on my TEFAL SV6115?
If the anti calc indicator is flashing on your TEFAL Iron, it means that the anti calc cartridge is no longer efficient. Replace the anti scale cartridge with a new one, then press the reset button for a minimum of 3 seconds. Also, the descaling procedure might need to be performed; see section "Descaling your generator" in this manual to perform the descaling procedure.
Why does my TEFAL SV6115 Iron leave water streaks on linen?
If water streaks appear on the linen when using your TEFAL Iron, it's likely because your ironing board is saturated with water because it is not suitable for use with an appliance. Check that your ironing board is suitable. We recommend that you use a vented/mesh type ironing board.
Why does my TEFAL SV6115 Iron leave brown streaks on linen?
If brown streaks come through the holes in the soleplate of your TEFAL Iron and stain the linen, it is because you are using chemical descaling agents or additives in the water ironing. Never add this type of product in the water tank (see “for what water may be used”). Contact an Approved Service Centre.
What to do if anti calc indicator is still flashing after replacing the cartridge in my TEFAL SV6115?
If the anti calc indicator is still flashing after replacing the cartridge in your TEFAL Iron, it means that you have not pressed the reset button. Press the reset button until the light stops flashing.
Why is my TEFAL SV6115 producing little or no steam?
There are several reasons why your TEFAL Iron might not be producing steam: * The water tank may be empty - fill the tank. * You may be using steam for the first time, or you have not used it for some time - press the steam control button away from your ironing board until the iron produces steam. * The setting is not correct (1 dot / 2 dots) and the soleplate is not hot enough to produce steam - set the iron at 3 dots (••• or MAX) and wait for the iron thermostat light to go out before activating the steam button again. * Steam cannot be produced at the temperature you have selected - set the thermostat control in the coloured zone (••• or MAX). * There is no anti calc cartridge in the appliance or it is not properly installed - make sure the anticalc cartridge is installed and...
Learn how to set up your steam generator, including locking the iron and filling the water tank for initial use.
Instructions on how to safely fill the removable or fixed water tank with tap water, ensuring not to exceed the MAX level.
Details on using the lock system to secure the iron to the base for safe and easy transport and storage.
Guide on changing temperature settings using the iron's thermostat and understanding the ECO mode function.
How to use the vertical steaming function to remove creases from hanging garments, with safety precautions.
Explanation of the automatic shut-off system that switches off the generator after a period of inactivity.
Instructions for regularly emptying the scale collector to maintain optimal steam performance and prolong appliance life.
A step-by-step guide on how to descale the appliance when the 'anti calc' indicator lights up, ensuring proper maintenance.
How to clean the iron's soleplate and plastic parts using appropriate methods, with important safety warnings.
Advice on storing the steam generator, including cord management, accessory storage, and cooling before storage.
General| Power | 2400 W |
|---|---|
| Soleplate Material | Ceramic |
| Vertical Steam | Yes |
| Anti-Scale System | Yes |
| Type | Steam Generator Iron |
| Anti-drip system | Yes |
| Calc clean alert | Yes |
| Auto shut-off | Yes |
| Self-cleaning | Yes |
| Anti-calc system | Yes |
| Weight | 1.5 kg |
To Next Page