17
• Allow your iron to heat up with a full water tank while
on its heel rest and with the temperature control set
to maximum.
• Once the indicator light switches off, unplug the iron
and place it over a sink.
• Remove the anti-calc collector.
• Shake the iron gently in a horizontal position above
the sink until some of the water (containing the
impurities) leaks from the soleplate. You may push the
turbo steam trigger to help flush out the minerals.
• To finish the process, replace the anti-calc collector,
pushing it until you hear a click.
• Plug in your iron for 2 minutes on the heel rest to dry
the soleplate.
2
min.
Descaling the steam chamber (once per month)
1800138416-01 FV26XX UK_110x154 19/01/16 11:28 Page17
To Next Page
Loading...
Need help?
General