19
PROBLEMS
POSSIBLE CAUSES SOLUTIONS
Water is leaking
from the holes in
the soleplate.
You are using the steam when
the iron is not hot enough.
Wait for the indicator light to turn
off.
You are using the turbo steam
button (turbo steam) too often.
Wait a few seconds between each
use.
You have stored the iron
horizontally without emptying
the water tank or setting the
steam control to
.
See the chapter on "Storing your
iron".
The iron leaks at
the start of
ironing.
You have removed the anti-calc
collector to fill up your iron.
Do not remove the anti-calc collector
when filling the iron.
The steam control dial is not set
to when filling the water tank.
Ensure that the steam control dial is
set to when filling the water tank.
A brown
discharge
coming from
the soleplate
is staining the
clothing.
You are using chemical descaling
agents.
Do not introduce a descaling agent
into the water tank.
You are not using the right type
of water.
Clean the steam chamber and see
the chapter on "What water should I
use?"
Clothing fibres are building up in
the holes of the soleplate and
burning.
Clean the steam chamber and the
soleplate with a damp sponge.
Periodically vacuum the holes in the
soleplate.
The soleplate is
dirty or brown
and may stain
clothing.
The temperature of the iron is
too hot.
Clean the soleplate as indicated
above. Consult the table of
temperatures to adjust the
temperature.
You are using starch. Clean the soleplate as indicated
above. Spray the starch on the reverse
side of the clothing to be ironed.
Your laundry has not been rinsed
sufficiently or you are ironing a
new item of clothing before
washing it.
Ensure that your laundry is
sufficiently rinsed to eliminate
potential soap deposits or chemical
products on new items of clothing
being sucked up by the iron and then
deposited on the linen.
IS THERE A PROBLEM WITH YOUR IRON?
1800138416-01 FV26XX UK_110x154 19/01/16 11:28 Page19
To Next Page
Loading...
Need help?
General