20 21
ON
DO’S & DON’TS
STANDING OR STORAGE POSITION
*
* Depending on model
Always store the unit in the storage solution provided. The unit is not designed to stand up on
its own
To remove the dust brush, insert a pointed object into the hole on
the back of the brush to lift and unclip the brush.
To separate the
accessories’ holder from
the storing base, rst turn
it upside down
Look for the hole on the
bottom of the base
Insert a pointed object
into the hole to unclip the
lower part of the storing
base
Remove the accessories’
holder from the storing
base
DISASSEMBLING
BATTERY DISPOSAL
To Next Page
Loading...
