18 19
Rinse thoroughly
Let it dry completely for at least
24 hours before re-installing.
There is a second lter in
your vacuum cleaner which
needs to be cleaned 2 times
per year
WASH 2X/YEAR
CLEAN 1X/WEEK
48H
NEW
REPLACE 2X/YEAR
Firstly remove the dust container (see previous
section). Then slide the switch on the handheld unit
upwards, and pull rmly on the ne particles lter to
remove it
NEW
REPLACE
1X/YEAR
CLEANING THE MOTOR FILTER
48H
CLEAN 1X/WEEK
* Not included
CLEANING THE BRUSH
Remove the main head from the tube by pressing the
lock system button, and pulling it away from the tube,
To remove the brush roller, release the handle, located
on the side of the brush head and twist to unlock.
*
2
1
Slide out the brush
1
2
Use scissors to carefully cut loose any hair wrapped around the brush Slide the brush roll back into the head
and twist to lock back into position
To Next Page
Loading...
