16 17
CLICK
Locate the slot on the container
base, onto the lip on the handle.
Lever the container back into
position until you hear a click.
Replace the separator by twisting
until it drops into position inside the
dust container
Remove the separator. Empty contents into a bin
MAX
1
2
For best results, empty the
dust container when it is full
Slide the switch on the handle
upwards, and lift away the dust
container
EMPTYING THE DUST CONTAINER
CLEAN 1X/WEEK
Slide the switch on the handle
upwards, and lift away the
dust container
Turn to unlock the lter and lift
out.
Remove the separator.
1
2
Allow to dry thoroughly. This is
very important and make take up
to 72 hours. Consider using the
spare lter during this time to
allow the lter to thoroughly dry.
Rinse the dust container under
the tap
Rinse the lter under the tap
CLEANING THE FILTER
Replace the lter back into the
separator and twist to lock into
position
Replace the separator, twisting
until it drops into position inside
the dust container.
CLICK
Locate the slot on the container
base, onto the lip on the handle.
Lever the container back into
position until you hear a click.