Tefcold FSC890H - Replacing the Light

36
Replacin
g
the Li
g
ht
REMEMBER to switch off the power before replacing the light!
Internal Light:
The internal fluorescent light is replaced
by demounting the light cover. Replace
the tube with an equivalent type.
The internal LED light should be
replaced by an equivalent type. Contact
your local supplier for original spare
parts.
Canopy Light:
The external fluorescent light in the
canopy is replaced by dismounting the
end piece of the canopy. Pull the
canopy plate to one side giving access
to the fluorescent light. Replace it with
an equivalent type.
The external LED light in the canopy is
replaced in the same way.
Contact your local supplier for original
spare parts.
Push carefully the canopy plate in place
and remount the end piece of the
canopy.