Teison TS-EVC22-001 - Reference Standard; Product Specification; Product Package

1.2 Reference Standard
No.
Standard No.
Standard No.
1
IEC
61851-1:2017
Electric vehicle conductive charging system – Part 1:
General requirements
2
EN
62196-2:2017
Plugs, socket-outlets, vehicle connectors and vehicle inlets –
Conductive charging of electric vehicles – Part 2:
Dimensional compatibility and interchangeability
requirements for a.c. pin and contact-tube accessories
3
SAE-J1772-2
017
SAE Electric Vehicle and Plug in Hybrid Electric Vehicle
Conductive Charge Coupler
1.3 Specification
Subject
Specification
Item No.
TS-EVC22-001
Product
22KW AC EV CHARGING STAION
Specific
ation
Charging station
inlet cable
Recommend to use cable no less than 6mm²
Charging station
Meet：IEC 61851-1:2017
Max size: 200mm（W）x320mm(H)x95mm(D)
Car side cable L
5M/5*6.0mm2+2*0.5mm2
Plug
32A,Meet EN 62196-2:2017/SAE-J1772:2017
Weight
≤6.47KGS
Note：Actual size is subject to the actual product
1.4 Product Package
Five-layer corrugated carton packaging is used for transportation，measured 485mm（L）
x 380mm（W）x 185mm（H）. 1PC/CTN, together with a product manual in it.