Why is my Teka Ventilation Hood not working?
If your Teka Ventilation Hood isn't working, there are several potential causes. First, ensure that the power cable is correctly connected and that there are no issues with the electricity supply. Then, check the power supply on the electronic board. Also, verify that the on/off switch is in position 1. Lastly, the remote control might need to be synchronised.
What to do if the remote control of Teka DHT 97670 ROS WH is not working?
If the remote control for your Teka Ventilation Hood isn't working, start by replacing the battery, ensuring it's inserted with the correct polarity. Also, make sure that the on/off switch is in position 1. If that doesn't solve the issue, the remote control may need to be synchronised with the hood.
How to fix the lights of Teka DHT 97670 ROS WH when they do not turn on?
If the lights on your Teka Ventilation Hood aren't turning on, several things could be the cause. Begin by checking that the lamp connector is properly hooked up. Next, ensure the on/off switch is in position 1. Also, check the Lighting Driver. Finally, the remote control might need to be synchronised.
What does it mean when the green LED flashes for 20 seconds on Teka DHT 97670 ROS WH?
If the green LED on your Teka Ventilation Hood flashes for 20 seconds, it indicates that the metal grease filter needs cleaning. Reset the filters when the hood is turned off by pressing the "P0" button on the remote control for 3 seconds while the LED flashes.
Why is the red LED flashing for 20 seconds on my Teka DHT 97670 ROS WH?
If the red LED on your Teka Ventilation Hood flashes for 20 seconds, it means the long-life or ceramic filter needs cleaning. To resolve this, reset the filters when the hood is turned off by pressing the button “P0” on the remote control for 3 seconds while the LED flashes.
Covers essential safety precautions for using the appliance, including user restrictions and warnings.
Guidelines for safe electrical connections, emphasizing professional installation and proper wiring.
Crucial operational advice for safe usage, including ventilation and appliance interaction.
Provides essential details about the appliance, its design, and compliance with standards.
Advice on efficient and environmentally friendly operation, including filter maintenance and piping.
Information on using original spare parts and replacing worn components for optimal performance.
Details regarding the manufacturer's warranty and conditions for maintaining its validity.
Step-by-step guidance for installing the appliance, including necessary precautions and tools.
Specifies required clearances between the hood, hob, and ceiling for safe and effective installation.
Explains how to operate the appliance using the remote control and its buttons.
Details the functions of the remote control and the appliance's operational buttons and indicators.
Describes the meaning of different LED light indicators on the hood body for status display.
Instructions for regular cleaning of the appliance's interior and exterior surfaces.
Guidance on cleaning and maintaining the metallic grease filters for optimal performance.
Information on cleaning ceramic filters and their recommended replacement interval.
Details on the LED lighting system, including maintenance and replacement.
A guide to identifying and resolving common problems with the hood's operation and features.
General| Width | 90 cm |
|---|---|
| Color | White |
| Extraction Rate (min) | 300 m³/h |
| Number of Speeds | 3 |
| Lighting | LED |
| Noise Level (max) | 65 dB |
| Energy Efficiency Class | A |
| Material | Stainless Steel |
| Number of Motors | 1 |
To Next Page
