21. INQUIRING FUNCTION
In cooking state, press " ", the LED will display clock for three seconds
and the "AM/PM" for another 3 seconds.
(2) In pre-set state, LED will display the clock and the seconds will be flashing at the same
time. Press " AM/PM " and "A"or "P" will be displayed for 3 seconds. Then press
" " to inquire the pre-set time. The pre-set time will flash for
3 seconds, then "A"or "P" will be displayed for another 3 seconds. After that, the oven
will turn back to the clock state.
(3) In the microwave cooking state, press " POWER " to inquire microwave power level, and
the current microwave power will be displayed. After three seconds, the oven will turn back
to the previous state. In 2 stages cooking state, the inquiring way can be done by the
same way as above.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "MEMORY" twice,stop pressing until the screen displays "2".
b. Press "POWER" three times until "PL8" displays.
c. Press number keys "3","2","0" in order to input the cooking time.
d. Press "MEMORY" to save the setting. Buzzer sounds once then turn back to waiting
states. If you press " " after the above step, the procedure will be
saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure
need to reset.
f. If you want to run the saved procedure, in waiting states, press "MEMORY" twice, screen
displays "2", then press " " to run.
20. Multi-section cooking
At most 2 sections can be set for cooking. In multi-section cooking, if one section is
defrosting, then defrosting shall be placed in the first section. When the
first stage finish, the buzzer will sound once and the next stage will begin cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave
power for 10 minutes. The cooking steps are as following:
(1) Press "POWER" for times to choose 80% microwave,now "PL8" is displayed;
(2) Press number keys "5","0","0" to set the cooking time;
(3) Press "POWER" for times to choose 60% microwave power, "PL6" is displayed;
(4) Press number keys "1","0","0","0" to set the cooking time;
(5) Press "
" to start cooking.
(1) In clock state, press " AM/PM " to display "A P " for 3 seconds.or" "
To Next Page
Loading...
