Teka HLB 840 - Safety During Pyrolytic Cleaning Process

32
Installation & Maintenance
Duringthepyrolyticcleaningprocess:
•Donotleaveanyclothsorfabrichangingfromtheovenhan-
dle or in close contact with it.
•Forsafetyreasons,iftheovenhasbeeninstalledbelowthe
counter, the hob must not be in use while the oven is in py-
rolytic mode.
•Theoven’sinsidelightwillremainoffandcannotbeturnedon.
•Theovenisequippedwithasafetylockmechanismthatpre-
vents the door from being opened during the cleaning cycle.
Donottrytoopenthedoorwhilethelockisactivated.
INFORMATION
This manual describes general oven characteristics, and
so they may not correspond in full to those of your oven.
Consult the User’s guide accompanying this manual to
learnaboutthespecicfeaturesandequipmentofyour
oven.
The manufacturer reserves the right to change the prod-
uct characteristics in order to improve its operation.