Teka IOVEN - Page 43

43
User’s Guide
English
NOTE
For the best results, add a teaspoon of mild
washing-up liquid to the water before pour-
ing this onto the dishcloth.
Switch on the oven, and go to the main
menu-hydroclean function:
When this function is pressed, a message ap-
pears containing an operating warning:
“The Hydroclean
©
function will clean your oven
automatically. For best results, do not interrupt.
An alarm will sound when cleaning is complete.
Wipe dry”.
Press accept to go to the Hydroclean summary
screen. Neither the temperature nor the cook-
ing time can be modified with this function.
IMPORTANT
The length of this function cannot be mod-
ified. To terminate the cycle before the end
time, switch the oven off with the ON/OFF
button.
You can select an end time for the Hydroclean
©
cleaning function. As explained in the section
“Planning: programming cooking time”, with
the exception that only the end time can be
entered.
Regardless of whether an end time has been
selected, when the cleaning process starts a
confirmation beep is heard (2 long and 2 short
beeps).
The time remaining until the end of the cleaning
process is displayed in the centre of the circle:
TEKA Hydroclean function
This function permits grease and other dirt at-
tached to the oven walls to be cleaned more
easily.
To make cleaning easier, it prevents the build-
up of dirt. Clean the oven frequently.
PROGRAMMING THE
TEKA HYDROCLEAN
©
FUNCTION
NOTE
Do not pour water inside the oven while it is
still hot. This could damage the enamel.
Always run the cleaning cycle when the oven
is cool. If the oven is too hot, the oven and the
enamel may be damaged.
First remove the trays and all the accessories
from inside the oven, including the tray sup-
ports or telescopic arms. To do so, follow the
instructions given in the Installation and Mainte-
nance Manual provided with the oven.
When the oven has cooled, spread a dishcloth
over the base of the oven.
Slowly pour 200 ml of water into the lower part
of the oven cavity.