Need help?Do you have a question about the Teka IZC 64630 MST and is the answer not in the manual?
General| Type | Induction |
|---|---|
| Width | 60 cm |
| Number of Cooking Zones | 4 |
| Control Type | Touch |
| Power Levels | 9 |
| Total Power | 7.2 kW |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Dimensions (W x D) | 600 x 510 mm |
| Cut-out Dimensions (W x D) | 560 x 490 mm |
| Installation | Built-in |
| Safety Auto Shut-off | Yes |
| Pan Detection | Yes |
| Safety Features | Auto Shut-off, Child Lock, Residual Heat Indicator |
Specifies required clearances around the hob for safe operation and ventilation.
Covers risks from ceramic glass, children's use, flammable materials, and prohibited items.
Highlights electrical shock risks, proper grounding, and installation advice.
Details voltage, frequency checks, grounding, and power surge protection.
Identifies and explains the functions of various touch control sensors and indicators.
Explains how to turn plates on, adjust power, and turn them off.
Describes how the hob detects suitable cookware for induction.
Covers child safety lock and disabling audible beeps.
Explains the Stop&Go pause function and the Power function for extra heat.
Details how to set and use the countdown timer for cooking zones.
How to change programmed time, disconnect the timer, and manage total power.
Introduces specialized cooking modes like Keep Warm, Melting, and Simmering.
Details automatic boiling control.
Specific conditions for using the Quick Boiling function.
Explains flexible zone cooking.
Describes the automatic power control for grilling.
Covers automatic power control for frying.
Covers automatic power control for deep frying.
Explains the automatic power control for confit cooking.
How to link two cooking zones for shared control.
Linking two zones for synchronized cooking operations.
Automatic disconnection if zones fail to switch off.
Tips for using cookware and instructions for cleaning the hob.
Information on product disposal and recycling.
Addresses issues like no power, no heat, humming, and touch control problems.
Explains error codes C85, C90, and C91 displayed on the indicators.
To Next Page
