How to fix a Teka Scrubber that does not start?
If your Teka Scrubber system isn't starting, there are a couple of things to check. First, make sure the power supply plug is correctly inserted. If that's not the issue, check if there's power at the outlet itself and resolve any issues with the mains.
Why is the suction power too low on my Teka Scrubber?
If the Teka Scrubber's suction power is too low, and smoke is hardly being extracted, it could be due to several reasons. First, the filter element might be saturated, in which case you should replace the filter package and properly dispose of the old filter. Another cause might be damage to the extraction elements, requiring their replacement. Also, check the suction and exhaust lines for any contractions and fix them as necessary.
Defines commercial application, limitations, and critical misuse warnings.
Explains the meaning of warning, caution, and notice symbols.
Outlines critical safety precautions for operation and maintenance.
Instructions for replacing the main particle filter.
Guidelines for replacing activated carbon filters or cassettes.
General| Brand | Teka |
|---|---|
| Model | LMD 508 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page